“Atlas Platinum PVL12 ALI Certified 12,000 lbs 2 Post Overhead Lift” has been added to your cart. View cart






Back to products

Atlas PVL9BP Platinum ALI Certified 9,000 lbs Baseplate Lift ATEAP-PVL9BP
$5,567.00 Original price was: $5,567.00.$1,899.00Current price is: $1,899.00.
Atlas BP10000X 10,000 lbs Baseplate Lift
$5,113.00 Original price was: $5,113.00.$1,735.50Current price is: $1,735.50.
Description
The Atlas® BP10000X commercial grade 2 post baseplate lift is built for those customers who want to lift heavy vehicles in a low ceiling garage. The Atlas® BP10000X incorporates the popular single point lock release columns have a middle welded support gusset that adds extra strength to the oversized columns.
If you need to lift a one ton dually or a Smart Car and only have an 11 foot ceiling, this is the lift for your shop.
Features & Benefits
- 10,000 lb. Capacity
- Commercial Grade
- Baseplate, Open-Top Style Lift
- Overall Height: 111 7/8″ (9′ 3 7/8″)
- Single-Point Lock Release Allows Both Columns To Be Disengaged Simultaneously
- Super-Symmetric Arms
- Dual Hydraulic Chain-Drive Cylinders Made to ANSI Standard
- Welded Support Gussets Increase Column Strength.
- Automatic Arm Restraints
- Powder Coat Finish
- Free 12 Piece Truck Adapter Set
- 5 yr Structural – 2 yr Hydraulic Warranty – Parts Only
Atlas® ATTD-BP10000X Specifications
Capacity | 10,000 lb. |
Overall Height | 111 7/8″ (9’ 3 7/8″) |
Overall Floor Width | 139 1/8″ (11’ 7 1/8″) |
Outside Column to Outside Column | 134 1/2″ (11’ 2 1/2″) |
Maximum Lift Height (Without Adapters) |
77 3/8″ |
Maximum Lift Height (With Adapters) | 86 3/8″ |
Minimum Arm Height | 4″ |
Inside Column | 112 1/4” (9’ 4 1/4”) |
Drive Thru | 101 1/4” (8’ 5 1/4”) |
Column Size | 9 1/2″ x 11″ |
Column Thickness of Steel | 6mm |
Base Of Lift | 17 1/2″ x 21 1/2″ |
Motor/Electrical Requirement | 220 volt single (1) phase. A 30 amp breaker is recommended |
Oil Requirement |
3-5 Gallons AW32/AW46 (NOT INCLUDED) |
Adapter Heights | 4 Each 2”, 3”, 6” |
Arm Hole/Adapter Peg Size | 1.5” |
Requires a minimum of 4″ of concrete with a 3000 psi. rating
Reviews (0)
Be the first to review “Atlas BP10000X 10,000 lbs Baseplate Lift” Cancel reply
Related products
1.5 HP Automatic Tire Changer Wheel Balancer Combo 980 800 with 300 Assist Arm
A++ 9,000 LB L2900 2 Post Lift Car Auto Truck Hoist
$758.52
Safety Mechanism: •Double Point Safety Lock Release•Automatic arm lock restraints•Relief valve built in power pump to prevent overloading•Door guards protection rubber•Up-limit switch to protect cylinders working stroke used in safe length scope•Heavy duty 5/16″ diameter cable and 4.56″ pulley reduce high stress on synchronization process and increase cable life•Stiffened base plate 15/32″ thickness•Ultra high molecular self lubricating nylon slider ensures carriage smooth moving up and down•Anchor bolts/mounting hardware included Control System: •Lifting operation by pressing “UP” button on motor•Manual lowering operation by pressing lever•Relief valve built in power pump to prevent overloading•1 sets truck adapters included•Lifting Capacity: 9,000 lbs•The overall Height 111-3/32″•The overall Width 133-1/4″•Column Width 10.59″ .Width between two post 106.3″ •Base Width 18.89″•Column Thickness of Steel 11/64″•Carriage Thickness of Steel 3/16″•Arms Thickness of Steel 15/64″ •Carriage Thickness of Steel 3/16″•Arms Thickness of Steel 15/64″•Front Arm 29.9″-47.2″•Rear Arm 29.9″-47.2″•Min pad height: 3-7/8″•Lift height max: 71.6″ •Drive-thru width clearance: 99.2″ Time to full rise: 20-60 sec
ACE Single Rail Folding Motorcycle Trailer
Alpha Sport Single Ride-up Folding Motorcycle Trailer
Atlas 9KBPX 9,000 lbs 2 Post Baseplate Lift
Atlas BP12000X 12,000 lbs Baseplate Lift
Atlas Platinum PVL14 ALI Certified 14,000 lbs 4 Post Lift
Tuxedo Fp14ka 14,000 Lb Chain Driven Alignment Lift, 3d Image Wheel Aligner, Rolling Air Jack Combo Package
$7,499.70
Reviews
There are no reviews yet.