“8 ft Deck Over Dolly” has been added to your cart. View cart






Back to products

Atlas PVL9BP Platinum ALI Certified 9,000 lbs Baseplate Lift ATEAP-PVL9BP
$5,567.00 Original price was: $5,567.00.$1,899.00Current price is: $1,899.00.
Atlas BP10000X 10,000 lbs Baseplate Lift
$5,113.00 Original price was: $5,113.00.$1,735.50Current price is: $1,735.50.
Description
The Atlas® BP10000X commercial grade 2 post baseplate lift is built for those customers who want to lift heavy vehicles in a low ceiling garage. The Atlas® BP10000X incorporates the popular single point lock release columns have a middle welded support gusset that adds extra strength to the oversized columns.
If you need to lift a one ton dually or a Smart Car and only have an 11 foot ceiling, this is the lift for your shop.
Features & Benefits
- 10,000 lb. Capacity
- Commercial Grade
- Baseplate, Open-Top Style Lift
- Overall Height: 111 7/8″ (9′ 3 7/8″)
- Single-Point Lock Release Allows Both Columns To Be Disengaged Simultaneously
- Super-Symmetric Arms
- Dual Hydraulic Chain-Drive Cylinders Made to ANSI Standard
- Welded Support Gussets Increase Column Strength.
- Automatic Arm Restraints
- Powder Coat Finish
- Free 12 Piece Truck Adapter Set
- 5 yr Structural – 2 yr Hydraulic Warranty – Parts Only
Atlas® ATTD-BP10000X Specifications
Capacity | 10,000 lb. |
Overall Height | 111 7/8″ (9’ 3 7/8″) |
Overall Floor Width | 139 1/8″ (11’ 7 1/8″) |
Outside Column to Outside Column | 134 1/2″ (11’ 2 1/2″) |
Maximum Lift Height (Without Adapters) |
77 3/8″ |
Maximum Lift Height (With Adapters) | 86 3/8″ |
Minimum Arm Height | 4″ |
Inside Column | 112 1/4” (9’ 4 1/4”) |
Drive Thru | 101 1/4” (8’ 5 1/4”) |
Column Size | 9 1/2″ x 11″ |
Column Thickness of Steel | 6mm |
Base Of Lift | 17 1/2″ x 21 1/2″ |
Motor/Electrical Requirement | 220 volt single (1) phase. A 30 amp breaker is recommended |
Oil Requirement |
3-5 Gallons AW32/AW46 (NOT INCLUDED) |
Adapter Heights | 4 Each 2”, 3”, 6” |
Arm Hole/Adapter Peg Size | 1.5” |
Requires a minimum of 4″ of concrete with a 3000 psi. rating
Reviews (0)
Be the first to review “Atlas BP10000X 10,000 lbs Baseplate Lift” Cancel reply
Related products
8 ft Deck Over Dolly
A++ 9,000 LB L2900 2 Post Lift Car Auto Truck Hoist
$758.52
Safety Mechanism: •Double Point Safety Lock Release•Automatic arm lock restraints•Relief valve built in power pump to prevent overloading•Door guards protection rubber•Up-limit switch to protect cylinders working stroke used in safe length scope•Heavy duty 5/16″ diameter cable and 4.56″ pulley reduce high stress on synchronization process and increase cable life•Stiffened base plate 15/32″ thickness•Ultra high molecular self lubricating nylon slider ensures carriage smooth moving up and down•Anchor bolts/mounting hardware included Control System: •Lifting operation by pressing “UP” button on motor•Manual lowering operation by pressing lever•Relief valve built in power pump to prevent overloading•1 sets truck adapters included•Lifting Capacity: 9,000 lbs•The overall Height 111-3/32″•The overall Width 133-1/4″•Column Width 10.59″ .Width between two post 106.3″ •Base Width 18.89″•Column Thickness of Steel 11/64″•Carriage Thickness of Steel 3/16″•Arms Thickness of Steel 15/64″ •Carriage Thickness of Steel 3/16″•Arms Thickness of Steel 15/64″•Front Arm 29.9″-47.2″•Rear Arm 29.9″-47.2″•Min pad height: 3-7/8″•Lift height max: 71.6″ •Drive-thru width clearance: 99.2″ Time to full rise: 20-60 sec
Reviews
There are no reviews yet.